How to use and maintain aluminum alloy doors and w

2022-07-22
  • Detail

With the general improvement of living standards, many advantages of aluminum alloy doors and windows are widely used in housing decoration. How to use and maintain aluminum alloy doors and windows has gradually become a new problem for consumers. Then how do we maintain aluminum alloy doors and windows

with the general improvement of living standards, many advantages of aluminum alloy doors and windows are widely used in housing decoration. How to use and maintain aluminum alloy doors and windows has gradually become a new problem for consumers. Then how do we maintain aluminum alloy doors and windows? Learn simple maintenance methods of aluminum alloy doors and windows with Yihe doors and windows

aluminum alloy doors and windows should be opened and closed gently as much as possible in the process of daily use. Remember not to use too much force when pushing and pulling. If obstacles are found during opening, the fault should be eliminated before opening. Moreover, keep the track of aluminum alloy doors and windows clean. If there are sundries in the push-pull track, it will not only cause the pushing and pulling not smooth, but also cause relatively large noise, and will damage the service life of aluminum alloy doors and windows

in summer, when there is a lot of rain, it is best to wipe the water on the doors and windows after the rain, especially the water in the pulley track, so as to avoid the damage of the sealing strip of aluminum alloy doors and windows caused by long-term water accumulation

when scrubbing aluminum alloy doors and windows, soft gauze or cotton cloth should be selected to avoid scratching the surface of aluminum alloy doors and windows due to scrubbing. And when wiping, try not to take the glass as the focus, so as to avoid personal safety accidents caused by glass falling

in addition, the hardware components of aluminum alloy doors and windows should be checked frequently at ordinary times. In case of looseness, the screws should be tightened actively. If some parts are damaged, the damaged parts should be repaired or replaced in time. If the chute is not smooth, you can apply a little fire wax or drop some engine oil to reduce the friction between the pulley and the track and keep the opening and closing of aluminum alloy doors and windows easy and flexible

the sealing strip and glass seal of aluminum alloy doors and windows are two key components of indoor sound insulation and heat insulation. If aging or shrinkage and looseness are found, they should be replaced in time

in daily use, try to avoid direct contact with acidic and alkaline chemicals. If stains or dirt are found on the surface of aluminum alloy doors and windows, clean them with soft cloth and water or neutral detergent to prevent corrosion of aluminum alloy doors and windows

the quality of aluminum alloy doors and windows is better than that of other materials, but attention should also be paid to maintenance in use. Regular maintenance can not only maintain a good appearance, but also effectively extend the service life of aluminum alloy doors and windows

[official website of Yihe door and window brand http://www.yihedoors.com Yihe door and window franchise network http://www.ehedoors.com 】

杭州男科医院

贵阳男科医院

西安男科医院

Copyright © 2011 JIN SHI